Publications

International Journals

2026

• Coupled blade profile and cylindrical deflector for enhancing Savonius wind turbine performance. Ocean Engineering, 365, 127386.
• Angle of attack effect on aerodynamic drag of axisymmetric blunt-based and boattail models at low speed. Journal of Mechanical Science and Technology, 40(5), 3563-3575.
• Drag reduction of axisymmetric boattail models by combination of base bleed and groove cavities. Physics of Fluids, 38, 035116.
• Dynamics of a multi-core compound droplet passing through two cylindrical obstructions in a microchannel. European Journal of Mechanics/B Fluids, 118, 204500.
• CFD-based investigation of air temperature effects on Savonius rotor performance under dynamically similar conditions. International Journal of Heat and Fluid Flow, 120, 110344.
• Enhancement of Aerodynamic Performance of Savonius Wind Turbines Using a Hybrid Airfoil–Multicurve Blade. Ocean Engineering, 355, 125149.

2025

• Laminar Cavitation Instability under Interference and Rotation Effects. Physics of Fluids, 37, 113327.
• Afterbody longitudinal cavities for drag reduction and application of artificial neural network for optimization of groove geometry. Physics of Fluids, 37(3).
• Enhancing computational accuracy of Savonius wind turbine: An application of shear-stress transport k–ω model with modified stress limiter. Physics of Fluids, 37(6).
• A data-driven analysis of near-wake flow dynamics for a blunt-based axisymmetric body under low-speed conditions. Physics of Fluids, 37(6).
• Accuracy computational simulation of the Savonius wind turbine aerodynamic performance: Effect of RANS turbulence models. Journal of Fluids Engineering (ASME), 147(12), 121202.
• A numerical study on aerodynamic characteristics and stability of spinning ogive-shaped models. Journal of Aeronautics, Astronautics and Aviation, 57(4), 931–944.
• Effect of afterbody angle and angles of attack on aerodynamic characteristics of an 85 mm projectile. Journal of Aeronautics, Astronautics and Aviation, 57(4), 1081–1093.
• Effect of afterbody angle and angles of attack on aerodynamic characteristics of an 85 mm projectile. Journal of Aeronautics, Astronautics and Aviation, 57(4), 1081–1093.

2024

• Delayed detached eddy simulation for wake flow analysis of axisymmetric boattail models under low-speed conditions. Physics of Fluids, 36, 035159.
• Enhancement of aerodynamic performance of Savonius wind turbine with airfoil-shaped blade for urban applications. Energy Conversion and Management, 310, 118469.
• Effect of splitter angles on characteristics of mixing layer flow: A numerical study. Journal of Applied and Computational Mechanics, 1–16.
• Numerical investigation of heat transfer performance and flow characteristics in turbine blade internal cooling using pin-fin arrays coupled with discontinuous ribbed end wall. International Journal of Heat and Fluid Flow, 109, 109547.
• Drag behavior of 25° Ahmed body effect by deflector length and angles. International Journal of Heat and Technology, 42(4), 1484–1494.
• Drag reduction for axisymmetric boattail model by longitudinal groove cavity under low-speed conditions. Journal of Mechanical Science and Technology, 38(8), 4209–4220.
• Performance assessment of Savonius wind turbine: Impact of the cylindrical deflectors with natural shapes. Ocean Engineering, 315, 119900.

2023

• Thermodynamic cavitation suppression on the laminar vortex flow over a circular cylinder in water. International Journal of Heat and Mass Transfer, 211, 124210.
• Predicting aerodynamic performance of Savonius wind turbine: An application of generalized k–ω turbulence model. Ocean Engineering, 286(2), 115690.
• Frequency characteristics of axisymmetric conical boattail models with different slant angles. Physics of Fluids, 35, 095113.
• Performance enhancement of Savonius wind turbine by multicurve blade shape. Energy Sources Part A, 45(1), 1624–1642.
• Cavitation flows past a rotating circular cylinder. Journal of Fluids Engineering (ASME), 145(11), 111301.
• Thermocapillary migration of a compound droplet on a substrate. European Journal of Mechanics – B/Fluids, 103, 1–10.
• Aerodynamic drag of axisymmetric models with different boattail angles under subsonic and supersonic flow conditions. Journal of Mechanical Science and Technology, 37, 6523–6535.

2022

• Influence of spike-nosed length on aerodynamic drag of a wing-projectile model. Advances in Military Technology, 17(1), 33–45.
• Design of a low-cost pressure measurement device: Validation and testing. International Journal of Sustainable Aviation, 8(4), 336–352.
• Improvement of mass transfer rate modeling for prediction of cavitating flow. Journal of Applied Fluid Mechanics, 15(2), 551–561.
• Modified Savonius wind turbine for wind energy harvesting in urban environments. Journal of Fluids Engineering (ASME), 144(8), 081501.
• Assessment of flow fluctuation pressure models for simulating cavitating flow. Technical Physics Letters, 48(4), 47–49.
• High-efficiency energy harvesting using a Savonius turbine with multicurve and auxiliary blade. Journal of Fluids Engineering (ASME), 144(11), 111207.

2021

• Study of thermodynamic effect on the mechanism of flashing flow under pressurized hot water by a homogeneous model. Journal of Fluids Engineering (ASME), 144(1), 011206.
• Assessment of a homogeneous model for simulating a cavitating flow in water under a wide range of temperatures. Journal of Fluids Engineering (ASME), 143(10), 101204.
• Experimental study of the skin-friction topology around the Ahmed body in cross-wind condition. Journal of Fluids Engineering (ASME), 144(3), 031209.

2019

• Modification of energy equation for homogeneous cavitation simulation with thermodynamic effect. Journal of Fluids Engineering (ASME), 141(8), 081102.
• Numerical simulation of cavitation in liquefied hydrogen using a simplified thermodynamic model. Cryogenics, 101, 29–35.

Domestic Journals

2026

• Application of aerodynamics features from high-speed aircraft to enhance savonius wind turbine performance. Vietnam Journal of Mechanics (Online First).

2023

• Phân tích trường dòng chảy quanh mô hình xe Ahmed trong điều kiện gió nghiêng. TNU Journal of Science and Technology, 228(10), 3–11.
• Phân tích dòng chảy trên bề mặt dốc với các góc nghiêng khác nhau. TNU Journal of Science and Technology, 228(10), 12–19.

2022

• Thuật toán xử lý ảnh và tương quan chéo trong phân tích dòng chảy vòi phun. TNU Journal of Science and Technology, 227(15), 146–154.
• Ảnh hưởng của mô hình độ nhớt rối lên mô phỏng dòng xâm thực trong nước ở nhiệt độ cao. TNU Journal of Science and Technology, 227(8), 208–217.
• Highly effective simulation models in analyzing aerodynamics of airfoils at low Reynolds number. Journal of Science and Technique, 20(02).
• Application of Neural Network in Predicting Optimization of Axisymmetric Boattail Angle for Drag Reduction. JST: Smart Systems and Devices, 35(2), 17-74.

2021

• Experimental and numerical evaluation of thermodynamic effect on NACA0015 hydrofoil cavitation in hot water. Vietnam Journal of Mechanics, 43(3), 253–264.

Conference Proceedings (Scopus Indexed)

2025

• The Effect of Leading-Edge Serration on Aerodynamic Characteristics of an Ishii Airfoil. Lecture Notes in Networks and Systems , V. 1311.

2024

• Parametric studies of fan-shaped pin-fins on heat transfer characteristics in a rectangular channel – Part II. Lecture Notes in Mechanical Engineering, 287–295.
• Flow analysis through center body of ducted fan to electric motor cooling. Journal of Physics: Conference Series, 2707, 012103.

2022

• Comparison of numerical and experimental methods in determining boundary layer of axisymmetric model. Lecture Notes in Mechanical Engineering, 297–302.
• Numerical simulation of hot water flashing flow in a converging–diverging nozzle. Lecture Notes in Mechanical Engineering, 753–760.
• Effect of the elliptical shape on the performance of the modified Savonius wind turbine. Lecture Notes in Mechanical Engineering, 399–412.
• Numerical analysis on lift and drag of a finite-thickness circular arc hydrofoil in different camber. Lecture Notes in Mechanical Engineering, 1215-1227.
• Numerical study for flow behavior and drag of axisymmetric boattail models at different Mach number. Lecture Notes in Mechanical Engineering, 729-741.
• Effect of Main Blade Configuration on the Performance of the Optimized Multicurve Savonius Wind Turbine. Lecture Notes in Mechanical Engineering, 433-438.

2019

• A simplified thermodynamic effect model for cavitating flow in hot water. IOP Conference Series: Earth and Environmental Science, 240(6), 062024.